MICRO AMPERE METER CIRCUIT USING uA 741

1. The micro ampere meter shown here is basically a DC millivolt meter.The circuit gives full scale deflection for 0.1V input.The current to be measured is passed through a known resistance R and the voltage drop across it is measured
2. Here the IC 1 uA 741 op-amp is wired as a non inverting amplifier.

   
   

NOTES:

• Assemble the circuit on a good quality PCB or common board.
• Use a +9V/-9V dual power supply for powering the circuit.
• The IC 1 ,uA 741 must be mounted on an IC base.
• The table given below shows the relationship between different values of R and the current that will give full scale deflection.