SIMPLE ELECTRONIC COMBINATION LOCK USING IC LS 7220

1. This is the circuit diagram of a simple electronic combination lock using IC LS 7220.This circuit can be used to activate a relay for controlling (on & off) any device when a preset combination of 4 digits are pressed.
2. The circuit can be operated from 5V to 12V.
3. To set the combination connect the appropriate switches to pin 3,4,5 and 6 of the IC through the header.As an example if S1 is connected to pin 3, S2 to pin 4 , S3 to pin 5, S4 to pin 6 of the IC ,the combination will be 1234.
4. This way we can create any 4 digit combination.Then connect the rest of the switches to pin 2 of IC.This will cause the IC to reset if any invalid key is pressed , and entire key code has to be re entered.
5. When the correct key combination is pressed the out put ( relay) will be activated for a preset time determined by the capacitor C1.Here it is set to be 6S.Increase C1 to increase on time.
6. For the key pad, arrange switches in a 3X4 matrix on a PCB.Write the digits on the keys using a marker.Instead of using numbers I wrote some symbols!.The bad guys will be more confused by this.

   
   
   

   
   
   

   PARTS LIST:
7. C1 1 1uF 25V Electrolytic Capacitor
   C2 1 220uF 25V Electrolytic Capacitor
   R1 1 2.2K 1/4W Resistor
   Q1 1 2N3904 NPN Transistor 2N2222
   D1 1 1N4148 Rectifier Diode 1N4001-1N4007
   K1 1 12V SPDT Relay Any appropriate relay with 12V coil
   U1 1 LS7220 Digital Lock IC
   S1-S12 12 SPST Momentary Pushbutton Keypad (see notes)
   HD1 1 12 Position Header