rajkot

Monday, February 20, 2012

SOUND PRESSURE METER

  1. The sound pressure meter is very useful in setting up home theater systems , if you need to test the sound pressure of each channels on different positions in the room..
  2. The circuit is nothing but a non- inverting amplifier based on op-amp CA 3140 9 (IC1).
  3. The sound picked by the condenser mic will be amplified by the IC1 and rectified by the bridge D1 to drive the meter M1.
  4. The deflection on the meter will be proportional to the pressure of the sound falling on the mic.The switch S1 can be used as an ON/OFF switch.


NOTES:
  • The bridge D1 can be a 1A bridge.If 1A bridge is note available,make one using four 1N4007 diodes.
  • The circuit ca be powered by using a 9V PP3 battery.
  • The capacitors must be rated 10V.
  • Mount the IC1 on a holder.



No comments:

Post a Comment